-
- NDT Equipments
Automatical Digital Pull-off Adhesion Tester
- Description In order to perform satisfactorily, coatings must adhere to the substrates on which they are applied. There are three different adhesion test procedures to assess the resistance of paints to separate from the substrate. The cross cut test, also described as cross-hatch, uses a blade to cut through the coating to the substrate. At least two cuts are made…
- Read more
-
- NDT Equipments
Concrete Test Rebound Hammer – LANGRY HT225-N
- HT225-N Concrete Test Hammer is a nondestructive detection instrument structure and concrete compression strength The surface hardness of concrete structures by detecting the estimated strength of the concrete member The instrument uses a spring drive value fillip hammer shells, shells hit the end of the contact is flip the lever detection test surfaces of concrete structures other end, resulting in resilience.…
- Read more
-
- NDT Equipments
Concrete Test Rebound Hammer – LANGRY HT225-NB
- Technical parameters 1.Basis for detection data processing: Technical Specification for Inspecting of Concrete Compressive Strength by Rebound Method JGJ/T 23-2011 2.Strength-measuring curve: Unified curve of factory preset national standard and local strength-measuring curve of each province, city and district 3.Memory storage: 240 standard components or more than 76,000 measuring points and related parameter data 4.Display screen: 256*64 (dot matrix), high-light OLED blue-ray…
- Read more
-
- NDT Equipments
Cross-Hole Analyzer (Champ-Q) – PDI
- Standards: NF P 94-160-1, ASTM D6760 and others. The Cross-Hole Analyzer determines the quality and consistency of the concrete of drilled shafts, slurry walls, bored piles, cast-in-situ piles and other types of concrete foundations. It is ideal for testing four probes in one go, thus, saving time and money. CHAMP-Q has colour coded wires for easy identification of probe receiving/transmitting. Test the entire shaft with CHAMP-Q Once a shaft is…
- Read more
-
- NDT Equipments
Digital Pull Out Tester – (LR-100T)
- Application field suitable for all kinds of anchor bolt, reinforcement, expansion bolt and other anchorage force test, also can do the glass curtain wall on the spot anti-pull force test (test), is the quality inspection unit necessary test instrument Product Features High strength steel thickening main body, high pressure does not deform Oil pump and one-way valve precision processing constant…
- Read more
-
- NDT Equipments
Digital Pull-Off Adhesion Tester – (BGD-500)
- We offers Digital Pull-Off Adhesion Tester. Digital Pull-Off Adhesion Tester BGD-500 is a portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. Pull-Off Adhesion Tester…
- Read more
-
- NDT Equipments
Digital Pull-Off Adhesion Tester – (BGD-500S)
- We offers Digital Pull-Off Adhesion Tester BGD-500S. Digital Pull-Off Adhesion Tester BGD-500S is a portable, hand-operated hydraulic instrument which is used to measure the force required to verify adhesive of ceramic tiles, epoxy coating away from its substrate using hydraulic pressure. This has dolly of 50 mm x 50 mm cross-sectional area. The pressure is displayed on a digital LCD…
- Read more
-
- NDT Equipments
Low Strain Pile Integrity Tester (Single channel) – RSM-PRT(R)
- Introduction RSM-PRT(R) Low Strain Pile Integrity Tester. It is exquisitely designed, user-friendly, and simple to operate. It is suitable for a variety of conventional low-strain method testing specifications. It has strong adaptability to the onsite environment, with high stability, real and reliable data. Application Low strain pile integrity testing by reflected wave method. Industrial-grade capacitive screen Industrial-grade capacitive touch…
- Read more
-
- NDT Equipments
Original Schmidt Concrete Test Hammer – Type N
- Measuring range 10 to 70 N/mm² compressive strength (below 25 N/mm² type P is better suited). Impact energy = 2,207 Nm. Rebound values are read from a scale. Testing the compressive strength of a prefabricated concrete girder. Rebound values are recorded by an assistant who will calculate mean values and read compressive strength values from a conversion diagram. Contact…
- Read more
-
- NDT Equipments
Original Schmidt Concrete Test Hammer – Type NR
- Measuring range 10 to 70 N/mm² compressive strength. Impact energy = 2,207 Nm. Rebound values are recorded as a bar chart on a paper strip. One roll of paper strip offers space for 4000 test impacts. A bridge concreted in several stages is tested for uniform concrete quality. The engineer will perform a series of tests in intervals of 10…
- Read more
-
- NDT Equipments
Pile Driving Analyzer (PDA) – PDI
- The Pile Driving Analyzer (PDA) system is the most widely employed system for Dynamic Load Testing and Pile Driving Monitoring in the world. PDA tests assess the capacity of several piles in a single day. Pile Driving Analyzer systems also evaluate shaft integrity, driving stresses, and hammer energy when monitoring installation. If you plan to use your PDA to test non-driven piles make sure…
- Read more
-
- NDT Equipments
Pile Integrity Tester – P8000
- The P8000 Wireless Pile Integrity Tester is a Wireless Foundation Pile Dynamic tester using the low strain reflected wave method for testing integrity of Concrete Pile and identify the extent and location of pile defect. The utilisation of the instrument provides the ability to assess possible presence of cracks, discontinuities and voids prior to construction in pre cast concrete piles or cast…
- Read more
-
- NDT Equipments
Pile Integrity Tester (PIT) – PDI
- The Pile Integrity Tester (PIT) gives peace of mind that a pile or shaft is free of major cracks and voids, prior to construction of the superstructure. It may be used on most concrete or wood foundations. The PIT may also be used to test piles integral in the structure, such as those supporting existing bridges or towers, and may…
- Read more
-
- NDT Equipments
Rebar Corrosion Detector – Profometer Corrosion
- Profometer Corrosion is the most advanced instrument for corrosion analysis based on half-cell method which is used to identify active corrosion of rebars based on the electro chemical properties of reinforced concrete for assisted measurements with rod and wheel electrodes. In addition to the basic electrode (rod or wheel) that are based on a Copper/ Copper sulphate half – cell, the use of unique one- and four-wheel…
- Read more
-
- NDT Equipments
Rebar Locator – (Bosch D-TECT150)
- The Bosch wall/floor scanner is designed for detecting a variety of materials with a wide band range. With seven operating modes of detection this device is ideal for the trades. BENEFITS Bosch Ultra-Wide Band (UWB) Radar Technology — offers a wide range of detection performance up to 6 In. wide Detects ferrous and non-ferrous metals, wood, live wiring and plastic…
- Read more
-
- NDT Equipments
Rebar Locator – Profometer 630 AI
- Profometer 630 AI is advanced rebar cover meter instrument for concrete scanning 1 & 2 layer rebar detection, with high cover measurement accuracy through Artificial Intelligence (AI) feature with Single-Line, Multi-Line and Area Scan Modes and an extensive choice of statistical views utilised by civil engineers and inspection companies for accessing the conformity of concrete cover of a new structure or dealing with corrosion analysis on large elements.…
- Read more
-
- NDT Equipments
Rebar Locators/Cover Meter – Profoscope(+)
- Proceq Profoscope Rebar Detector The Profoscope+ is a fully integrated rebar locator with data storage. To increase the efficiency on the construction site this enhancement of the Profoscope not only offers real time visualization of rebar’s, but also automatic data collection. ProfoLink: The included Window based software ProfoLink offers the possibility to comfortably download, edit and present the data measured by the rebar locator. Data exchange can be done…
- Read more
-
- NDT Equipments
Silver Schmidt Digital Concrete Test Hammer
- EXTENDED RANGE OF APPLICATIONS l. Conversion curves are provided for a wide range of compressive concrete strength, including low and high strength concrete fc<10 N/mm2 (1.450 psi) and up to 170 N/mm2 (24.650 psi). 2. Conversion curves for different types of modern concrete are preset in the Silver Schmidt, based on tests performed by an independent institution. OPERATION : 1.…
- Read more
-
- NDT Equipments
Static Load Tester (SLT) – PDI
- Monitoring up to 16 Independent Channels The Static Load Tester (SLT) automatically obtains and records reliable readings at programmable load intervals during a static load test. The system allows for monitoring of up to 16 independent channels taken from traditional pile-top measurements or from embedded sensors from each data acquisition box. Many boxes can be connected to the Static Load…
- Read more
-
- NDT Equipments
Testing Anvil
- Each test hammer should be checked after 1000 test impacts. A testing anvil is used to check whether there bound test mechanism is working correctly. In case of values beyond the tolerance (due to contamination by very fine cement, wear or defects) cleaning or inspection will be required. Contact Now Enquiry Now
- Read more
-
- NDT Equipments
Ultrasonic Cross-Hole Tester – MCHA
- All-in One system MCHA Cross-Hole Tester is an Ultrasonic Cross-Hole testing kit , also referred to Ultrasonic Crosshole Sonic Logging system . MCHA is used for a common test for concrete foundations , where tubes are cast into the concrete during construction so that a series of tests can be carried out between pairs of tubes. The transmitter and receiver Probes are lowered and transit time and…
- Read more
-
- NDT Equipments
Ultrasonic Pulse Velocity Tester – (58-E4800)
- Description Introduction The 58-E4800 UPV tester is used for quality control and inspection of concrete. It measures the transit time of ultrasonic pulses through concrete for inspection of new and old structures, slabs, columns, walls, fire damaged areas, precast and prestressed beams, cylinders and other concrete forms. Combined with an oscilloscope can identify honey combs, voids, cracks and other non-homogeneous conditions…
- Read more
-
- NDT Equipments
Ultrasonic Pulse Velocity Tester – Proceq PL200
- Proceq PL200 is best in class on site Ultrasonic Testing instrument for accessing the concrete uniformity via Line and area scans with measurement range up to 15m (depending on concrete) to ensure accurate path length measurement, perpendicular crack depth measurement and surface velocity measurement. Proceq PL200's superior feature of on- board storage and upgradation to use with single shear wave transmitter or expandable with Pundit Pulse echo transmitter makes it…
- Read more
-
- NDT Equipments
Ultrasonic Pulse Velocity Tester – Proceq PL250
- Proceq PL250 array is an ultrasonic imaging scanner utilized for location of pipes and tendon ducts beyond the rebar layer measuring thickness of concrete elements & tunnel linings. Based on Phased array ultrasonic pulse echo technology, the instrument offers ultrasonic tomography for conducting real time B scans and panorama scan capability for determining location of voids, honeycombing, delamination etc. Proceq PL250 array is supplied with shear…
- Read more
Calibration Services:- Force, Dimension – Basic, Weighing Scale, Pressure, Acceleration and Speed, Thermal, Other.
Testing Services:- Non-Destructive Test, Concrete Test, Foundation Test, Building Material – Mechanical Test, Soil and Rock Test, Building Material – Chemical Test.