-
- NDT Equipments
Automatical Digital Pull-off Adhesion Tester
- Description In order to perform satisfactorily, coatings must adhere to the substrates on which they are applied. There are three different adhesion test procedures to assess the resistance of paints to separate from the substrate. The cross cut test, also described as cross-hatch, uses a blade to cut through the coating to the substrate. At least two cuts are made…
- Read more
-
- NDT Equipments
Concrete Test Rebound Hammer – LANGRY HT225-N
- HT225-N Concrete Test Hammer is a nondestructive detection instrument structure and concrete compression strength The surface hardness of concrete structures by detecting the estimated strength of the concrete member The instrument uses a spring drive value fillip hammer shells, shells hit the end of the contact is flip the lever detection test surfaces of concrete structures other end, resulting in resilience.…
- Read more
-
- NDT Equipments
Concrete Test Rebound Hammer – LANGRY HT225-NB
- Technical parameters 1.Basis for detection data processing: Technical Specification for Inspecting of Concrete Compressive Strength by Rebound Method JGJ/T 23-2011 2.Strength-measuring curve: Unified curve of factory preset national standard and local strength-measuring curve of each province, city and district 3.Memory storage: 240 standard components or more than 76,000 measuring points and related parameter data 4.Display screen: 256*64 (dot matrix), high-light OLED blue-ray…
- Read more
-
- NDT Equipments
Cross-Hole Analyzer (Champ-Q) – PDI
- Standards: NF P 94-160-1, ASTM D6760 and others. The Cross-Hole Analyzer determines the quality and consistency of the concrete of drilled shafts, slurry walls, bored piles, cast-in-situ piles and other types of concrete foundations. It is ideal for testing four probes in one go, thus, saving time and money. CHAMP-Q has colour coded wires for easy identification of probe receiving/transmitting. Test the entire shaft with CHAMP-Q Once a shaft is…
- Read more
-
- NDT Equipments
Digital Pull Out Tester – (LR-100T)
- Application field suitable for all kinds of anchor bolt, reinforcement, expansion bolt and other anchorage force test, also can do the glass curtain wall on the spot anti-pull force test (test), is the quality inspection unit necessary test instrument Product Features High strength steel thickening main body, high pressure does not deform Oil pump and one-way valve precision processing constant…
- Read more
-
- NDT Equipments
Digital Pull-Off Adhesion Tester – (BGD-500)
- We offers Digital Pull-Off Adhesion Tester. Digital Pull-Off Adhesion Tester BGD-500 is a portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. Pull-Off Adhesion Tester…
- Read more
-
- NDT Equipments
Digital Pull-Off Adhesion Tester – (BGD-500S)
- We offers Digital Pull-Off Adhesion Tester BGD-500S. Digital Pull-Off Adhesion Tester BGD-500S is a portable, hand-operated hydraulic instrument which is used to measure the force required to verify adhesive of ceramic tiles, epoxy coating away from its substrate using hydraulic pressure. This has dolly of 50 mm x 50 mm cross-sectional area. The pressure is displayed on a digital LCD…
- Read more
-
- NDT Equipments
Low Strain Pile Integrity Tester (Single channel) – RSM-PRT(R)
- Introduction RSM-PRT(R) Low Strain Pile Integrity Tester. It is exquisitely designed, user-friendly, and simple to operate. It is suitable for a variety of conventional low-strain method testing specifications. It has strong adaptability to the onsite environment, with high stability, real and reliable data. Application Low strain pile integrity testing by reflected wave method. Industrial-grade capacitive screen Industrial-grade capacitive touch…
- Read more
-
- NDT Equipments
Original Schmidt Concrete Test Hammer – Type N
- Measuring range 10 to 70 N/mm² compressive strength (below 25 N/mm² type P is better suited). Impact energy = 2,207 Nm. Rebound values are read from a scale. Testing the compressive strength of a prefabricated concrete girder. Rebound values are recorded by an assistant who will calculate mean values and read compressive strength values from a conversion diagram. Contact…
- Read more
-
- NDT Equipments
Original Schmidt Concrete Test Hammer – Type NR
- Measuring range 10 to 70 N/mm² compressive strength. Impact energy = 2,207 Nm. Rebound values are recorded as a bar chart on a paper strip. One roll of paper strip offers space for 4000 test impacts. A bridge concreted in several stages is tested for uniform concrete quality. The engineer will perform a series of tests in intervals of 10…
- Read more
-
- NDT Equipments
Pile Driving Analyzer (PDA) – PDI
- The Pile Driving Analyzer (PDA) system is the most widely employed system for Dynamic Load Testing and Pile Driving Monitoring in the world. PDA tests assess the capacity of several piles in a single day. Pile Driving Analyzer systems also evaluate shaft integrity, driving stresses, and hammer energy when monitoring installation. If you plan to use your PDA to test non-driven piles make sure…
- Read more
-
- NDT Equipments
Pile Integrity Tester – P8000
- The P8000 Wireless Pile Integrity Tester is a Wireless Foundation Pile Dynamic tester using the low strain reflected wave method for testing integrity of Concrete Pile and identify the extent and location of pile defect. The utilisation of the instrument provides the ability to assess possible presence of cracks, discontinuities and voids prior to construction in pre cast concrete piles or cast…
- Read more
Calibration Services:- Force, Dimension – Basic, Weighing Scale, Pressure, Acceleration and Speed, Thermal, Other.
Testing Services:- Non-Destructive Test, Concrete Test, Foundation Test, Building Material – Mechanical Test, Soil and Rock Test, Building Material – Chemical Test.