“Mixfix Plaster” is a strong, durable, pre-mixed powder suitable for plastering over all types of old or new conventional clay bricks, fly ash bricks/blocks and Autoclaved Aerated Concrete blocks (AAC). It is normally applied to masonry interiors and exteriors to achieve a smooth surface.

Surface Preparation:

• Dirt, soil, and roof runoff stains from the surface should be removed.
• Use a garden hose to loosen the dirt. Start at the top and wash the dirt down the wall.
• Proper hacking is to be done prior to application in concrete surface.
• Pre-wet the wall before application.

Special Properties:

• Preparation is simple, just add water
• Lighter than traditional cement- sand site mix mortar
• Minimizes cracking and shrinkage
• Prevents seepage of water.
• Fungus resistant
• Durable & easy to apply
• Saves both manpower and time
• Being ready to use, it covers more work per day.

Preparation Of “Mixfix Plaster”:

• Take a small amount of water in a bucket and gradually add “Mixfix Plaster” in it. Mix the product with approximately 20% of water.
• Mixing can be done manually or by stirrer.
• Mixing to be done till homogenous lump free mix is obtained
• Protect the paste from heat and use within 30 minutes of preparation

Areas Of Use:

• Under coating and plastering over existing concrete and brick/block walls
• Use as a levelling plaster for correction of surface undulation in bare concrete block and other cementitious substrates
• Basic levelling of concrete, light weight blocks and bricks
• Filling holes and irregularities, levelling walls and ceilings
• Create a leveled surface from uneven masonry or concrete wall

Do’s About “Mixfix Plaster”:

• Apply the mix to the surface using a steel trowel in a smooth even motion working from the base of the surface upwards to reduce wastage
• Apply the mix with a trowel, followed by a second levelling if required
• Once the surface is uniform, level with a wooden/iber/ steel/plastic loat to produce a smooth even surface
• Water curing for 3-4 days should be carried out prior to any subsequent application depending on the moisture level of the surface

Don’ts About “Mixfix Plaster” :

• Do not apply straight on to gypsum panels
• Do not use in damp areas
• Do not add water to make it workable, prepare a fresh mixture.
• Avoid very high speed mixing when electric mixing equipments are used

Useful Tips:

• “Mixfix Plaster” should be stored in a dry place. Although “Mixfix Plaster” is non-hazardous, following precautions should be adhered
• Keep out of reach of the children.
• Avoid inhalation of dust
• Incase of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately.