-
- Concrete Testing Equipments
Accelerated Curing Tank
- MODEL: QCC-111 a) 24 Hour cycle from time of mixing. b) Controlled 35oC or 100oC ±2oC Curing Temperature for concrete. c) Controlled 27oC ± 2oC Curing Temperature for grey cement. The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing…
- Read more
-
- Bitumen and Asphalt Testing Equipments, Concrete Testing Equipments
Asphalt And Concrete Floor Saw
- MODEL: QCC-BT-027 Driven by electrical motor or by engine as per customers requirement. Diamond bit of 100 mm to 600 mm maximum can be supplied as per requirement. The trolley in which the engine is fitted is supplied with cooling arrangements with the help of a water tank. Arrangements to control the depth is also provided. A safety guard is…
- Read more
-
- Concrete Testing Equipments
Beam Mould
- MODEL: QCC-046 Two standard sizes of Beam Moulds are offered for casting concrete specimens for flexural strength testing. These beam moulds are made of cast iron and are supplied complete with a base plate. Four standard sizes of cube moulds are offered and supplied complete with base plate. Model QCC-046 Description A. Beam Mould Flexure Beam Strength Testing Beam Mould…
- Read more
-
- Concrete Testing Equipments
Compaction Factor Apparatus
- MODEL: QCC-075 IS 1199, 5515. & BS 1881-103 The apparatus is used for determining the work ability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low work ability where true slump values are not reliable. Specifications: It consists of two rigid conical hoppers and…
- Read more
-
- Concrete Testing Equipments
Compression Testing Machine – Dial Type
- MODEL: QCC-03 Compression Testing Equipment Electrically Cum Manually (Hand) Operated. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum…
- Read more
-
- Concrete Testing Equipments
Compression Testing Machine – Hand Operated
- MODEL: QCC-01 (Channel Model): Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. Model QCC-01 QCC-02 Capacity (in KN) 1000 KN 1500 KN Pressure Gauge (In KN) 1000 KN 1500 KN…
- Read more
-
- Concrete Testing Equipments
Concrete Permeability Apparatus
- MODEL: QCC-121 As Per IS 3085 / DIN Standard (Single Cell/Three Cell/Six Cell Model) One of the durability test of concrete is to determine permeability of water through specimen. Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory. SPECIFICATION : The concrete permeability apparatus comprises of a brass…
- Read more
-
- Concrete Testing Equipments
Concrete Vibrating Table
- MODEL: QCC-091 Specification: Proper compaction of cement and concrete while casting specimens for compressive or flexural strength testing essential to achieve a better and more consistent mixture. The cement and concrete vibrating table top has stops along its edges to prevent moulds from sliding off the table during operation. The maximum load capacity is 140 kg. The concrete vibrating tables…
- Read more
-
- Bitumen and Asphalt Testing Equipments, Concrete Testing Equipments
Core Cutting/ Drilling Machine (Motorized)
- MODEL: QCC-BT-025 Rated Voltage: ~220 V / 50Hz, Power Input: 2800W, No-Load Speed: 840rpm, Max. bit diameter: Ã~50mm/100mm/150mm Shaft Male: 1 1/4"UNC Features : 1. Compact size with light weight as well as safety in operation, 2. The drills are equipped with a friction clutch as well as over load current protection for protecting motor, 3. High-strength gear to keep the drill working…
- Read more
-
- Concrete Testing Equipments
Cube Mould – ISI
- MODEL: QCC-008 For concrete compressive strength testing we offer highly sophisticated testing machines duly made by our engineers and technicians keeping in mind the overall usages. Our concrete compressive strength testing machines includes concrete strength testing moulds like Cube Moulds, Beam Moulds, Cylindrical Moulds along with Flexural Strength Testing Machine that are equipped with the latest designs and operating principle.…
- Read more
-
- Concrete Testing Equipments
Cylindrical Mould
- MODEL: QCC-047 Moulds for testing concrete cylinders for Compressive Strength Testing are offered in two different sizes. These cylindrical moulds are made of Cast Iron and split into two parts longitudinally. These are supplied complete with a base plate and top plate. Model QCC-047 Description A. Cylindrical Mould Cylindrical Mould 100mm dia. x 200 mm ht. with base plate. Made…
- Read more
-
- Concrete Testing Equipments
Digital Compression Testing Machine
- MODEL: QCC-037 The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum…
- Read more
Calibration Services:- Force, Dimension – Basic, Weighing Scale, Pressure, Acceleration and Speed, Thermal, Other.
Testing Services:- Non-Destructive Test, Concrete Test, Foundation Test, Building Material – Mechanical Test, Soil and Rock Test, Building Material – Chemical Test.