-
- Cement Testing Lab Equipments
Air Entrainment Meter
- MODEL: QCC-109 IS 1199 1959 & BS 1881-106 As entrainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it ,measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additives to increase work ability of concrete in turn requires an air content check to be made. Air entrainment meters are…
- Read more
-
- Cement Testing Lab Equipments
Blaine’s Air Permeability Apparatus
- MODEL: QCC-062 IS 4031, 5516, 1727 and 4828, ASTM C-204 BS 4359-2 The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type are permeability. Specification: The apparatus consists one each of permeability cell 12.5mm I.D. manometer 'U'…
- Read more
-
- Cement Testing Lab Equipments
Briquette Mould (Single/Three)
- MODEL: QCC-096 IS 269 1958, Bs12. For casting of cement briquettes for tensile strength tests. It is a two part split mould made of gun metal. Two thumb screws facilitate easy and quick assembling and dismantling of the mould. The minimum cross section of the briquettes cast is 25.4 mm x 25.4 mm. Supplied complete with a steel base plate.…
- Read more
-
- Cement Testing Lab Equipments
Cement Flow Table
- MODEL: QCC-068 IS : 6932 ( PART VIII) ASTM C 230,BS 4551:1 This is used for determining the work ability of building limes. Specification: The flow table consists of a 30 cm dia. polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam…
- Read more
-
- Cement Testing Lab Equipments
Cement Flow Table – Electric
- MODEL: QCC-072 IS 5512 & BS 4551-1 This used for measuring the consistency of pozzolana and also cement mortar and hydrated lime. Specification : It consists of a machined brass table top 250+/- 2.5mm dia. Mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to conical brass mould 100mm i.d. top dia. and…
- Read more
-
- Cement Testing Lab Equipments
Cement Mortar Mixer
- MODEL: QCC-078 IS : 4031,1727 It is used for mixing cement pastes, mortars and pozzolanas. Specification: The apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 + 5 r.p.m. and 285 + 10 r.p.m. with planetary motions of approximately 62 r.p.m. + 5 r.p.m.…
- Read more
-
- Cement Testing Lab Equipments
Cement Sampler
- MODEL: QCC-061 IS 7535 1986 ASTM C183 AASHTO T127 This is a brass tube approximately 53 cm long and 2.8 cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near handle. Total sample collected at…
- Read more
-
- Cement Testing Lab Equipments
Cone Penetrometer For Mortar
- MODEL: QCC-079 IS 2250-1965 For determining the consistency of masonry mortar Consists of a movable bearing rod to which a cone 145mm. Long and 75mm dia at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring the penetration.…
- Read more
-
- Cement Testing Lab Equipments
Gillmore Needle Apparatus
- MODEL: QCC-065 ASTM C 266 This instrument is used for determining the time setting of hydraulic cement. Specification: A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia. ¼ lb. Wt. 1 no. Final needle 1/24 inch dia. ¼ lb. Wt. 1 no. Glass base plate. Complete…
- Read more
-
- Cement Testing Lab Equipments
Heat Of Hydration Apparatus
- MODEL: QCC-090 IS 11262-1985, ASTM C 186 This equipment is required to determine the heat of hydration of cement as expressed in calories per gram.The equipment comprises of the following : 1) A wide mounted double walled vacuum flask with a stop cock 38 mm & a insulating container for the flask 2) A Beckman thermometer (Range 5° C )held tightly by…
- Read more
-
- Cement Testing Lab Equipments
Jolting Apparatus
- MODEL: QCC-093 IS 1727 1967, IS 4031 1968, ASTM C 394, C 64 For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determining the transverse strength. Specification : The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800…
- Read more
-
- Cement Testing Lab Equipments
Le Chatelier Flask
- MODEL: QCC-082 IS 4031 1968, ASTM C 188 Specification : Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in that fits a ground glass stopper.…
- Read more
-
- Cement Testing Lab Equipments
Le Chatelier Mould
- MODEL: QCC-081 IS 269, 712, 5514, 1727, 2645, 6932 (PART IX) BS 6463 It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class 'A' Limes. Specification : It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel…
- Read more
-
- Cement Testing Lab Equipments
Length Comparator
- MODEL: QCC-088 IS 1199-1959, IS 4031 1968 BS 1881, ASTM C 151, C490 It is used to measure the dying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. Specification : The instrument consists of a channeled base over which two vertical pillars are fixed.…
- Read more
-
- Cement Testing Lab Equipments
Mortar Cube Vibrating Machine
- MODEL: QCC-092 Quality Standard : As Per IS 4031, IS 10080 Vibrating Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the…
- Read more
-
- Cement Testing Lab Equipments
Mortar Needle Penetrometer
- MODEL: QCC-098 ASTM: C 403 It is used for finding out the rate of hardening of mortar sieved from concrete spring and a stem graduated from 0-70 kg x 1 kg. Six interchangeable penetration needles of areas 645, 323, 65 32 and 16mm sq. Is provided . The penetration resistance is measured by the force exerted to penetrate the mortar…
- Read more
-
- Cement Testing Lab Equipments
Ring Mould
- Model No.: QCC-112 Standards: IS 712 1956, ASTM C 187 QCC Lab offers a ring mould for judging the strength and stability of concrete specimens of diversity. Our machine (Model QCC-112) has been developed as per the international standards and best practises of the engineering and construction industries and provides highly precise results. QCC Lab Ring Mould consists of mould…
- Read more
-
- Cement Testing Lab Equipments
Shrinkage Bar Mould
- MODEL: QCC-086 (ONE, TWO, THREE & FOUR GANG) IS 4031, 10086, ASTM C 227. & BS 1881. The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Specification : The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has…
- Read more
-
- Cement Testing Lab Equipments
VEE BEE Consistometer
- MODEL: QCC-073 IS 1199 & BS EN 12350. The instrument is used for work ability as well as consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out work ability of concrete expressed in…
- Read more
-
- Cement Testing Lab Equipments
Vicat Needle Apparatus
- MODEL: QCC-063 IS 4031, 2645, 2542 ( PART-1), 1727, 5513 & 712 BS 12, 146, 915, 1370, 4027, 4246, 4248 AASHTO T 129, E 131. This instrument is used for determining the normal consistency and setting times of cement and 'A' class limes. Specification: The apparatus consists of a metallic frame bearing a freely movable and with a cap at…
- Read more
Calibration Services:- Force, Dimension – Basic, Weighing Scale, Pressure, Acceleration and Speed, Thermal, Other.
Testing Services:- Non-Destructive Test, Concrete Test, Foundation Test, Building Material – Mechanical Test, Soil and Rock Test, Building Material – Chemical Test.