MODEL: QCC-ST-095 IS :460 (Par t-I, II) 1978 Test Sieves is a common laboratory requirement. Sieves are used for sieving of chemical powders, medical powders, aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like IS, BS, ASTM, DIN etc. In Civil Engineering it is a common practice to use sieves for gradation and particle…
MODEL: QCC-ST-059 It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture contents, when soaked in water. The load applied to restrain the swelling is transferred on to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead…
MODEL: QCC-ST-061 IS 2720 (PART X) ASTM T 208 This is similar to above with the added advantage of a motorized drive permitting constant rates of stain. Specification : Comprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25 mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain…
MODEL: QCC-ST-039 The extractor frame is used for taking out soil samples compacted or undisturbed, from 100mm dia and 150mm dia cylinders such as Core Cutters, Proctor moulds, C.B.R. moulds etc. Specification: It consists of a 50Kn capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 4"/100mm dia and the other of 6"/150mm dia moulds…
MODEL: QCC-ST-031 As Per IS 2720 (Part XBII)- 1966 BS 1377; EN DD ENV 1997-2; ASTM D2434; AASHTO T215 Clays and silts are tested using the technique. Flow of water through the specimen is observed by monitoring the rate of fall of water in the tube. It is essential that soils of very low permeability are sealed inside the cylinder…
MODEL: QCC-ST-088, 089 Vibratory Sieve Shaker accommodates 8in and 200mm test sieves. It combines the latest in electronic control with proven separation technology for fast, accurate separations of materials. The quiet, compact benchtop unit offers complete control of multi-directional agitation for optimum performance based on material type. The optimal size range is dependant on material type but typically, particles between from No.…